Jansicotek Z19 laptop stand Black 10-17 in 1.56 lb
Adjustable aluminium stand holds 10–17 in laptops, folds flat, weighs 1.56 lb and tilts 0–90° for ergonomic viewing
- Accessory categoryStand
- Largest supported sizeSupport up to 17-in. Laptop
- MeasurementsPruduct size (L × W × H): 9.4 × 11.22 × 2.16 In
- Main functionNotebook
- Product colorBlack
- DetailsColor: Black Weight: 1.56 lb Pruduct size (L x W x H): 9.4 ×
- Ergonomic height and angle adjustment from 0° to 90° reduces neck strain
- Hollow aluminum design improves airflow for passive laptop cooling
- Supports devices from 10 to 17 inches weighing up to 13 lbs
- Foldable 1.56 lb frame with carry hole enables portable desk setups
- Silicone pads on contact points prevent scratches and keep laptop stable
Ergonomic aluminium stand for 10–17 inch laptops
The Jansicotek Z19 is a foldable aluminium riser that holds any laptop or tablet from 10 to 17 inches. It weighs 1.56 pounds and measures 9.40 by 11.22 by 2.16 inches. The hollow design improves airflow while the silicone pads grip the device and keep the stand steady on the desk.
Replaces a flat desk surface when posture
If you work long hours with the screen too low, the Z19 lifts it through a continuous 0 to 90 degree range so your neck stays neutral. The aluminium body conducts heat away from the chassis, helping when the internal fan cannot keep up. It is not for users who need built-in fans, USB hubs or a fixed typing angle.
Tool-free setup with one common snag
Unfold the stand, set the desired height and angle by hand, then place the laptop on the silicone pads — no screws or Allen keys required. The only frequent issue is forgetting to tighten the hinge enough, which lets the angle slip under a heavy 13 pound load. A quick finger-tighten solves it.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $34.99
- Pricier than about 81% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Model name | Z19 |
| Accessory category | Stand |
| Product color | Black |
| Size & build | |
| Measurements | Pruduct size (L × W × H): 9.4 × 11.22 × 2.16 In |
| Fan quantity | No |
| Compatibility | |
| Largest supported size | Support up to 17-in. Laptop |
| In the box | |
| In the box | 1 X Laptop Stand, Aluminum Computer Riser for any laptop 10 to 17 in |
| More details | |
| Main function | Notebook |
Questions about this item
How much desk space does the 9.40 x 11.22 inch footprint of the Z19 stand occupy?
The stand measures 9.40 inches deep by 11.22 inches wide, so it needs that much clear desk area plus room for your laptop overhang.
What is the correct way to set the angle on the Z19 without forcing the hinge?
Lift the laptop platform gently until it clicks into the desired notch between 0° and 90°; do not push past the stop or the hinge may bind.
When should the silicone pads on the Z19 be replaced to keep the laptop from sliding?
Replace the top and bottom silicone pads once they lose grip or show visible wear, typically after extended daily use.
More in Laptop Cooling Stands & Fans
Similar items
LUOM P43F laptop cooling pad dual fan 11-17.3in silver
- Stand
- Support up to 17-in…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
LUOM P43F laptop cooling pad silver 11-17.3" 2 fans
- Holder
- Support up to 17-in…
LUOM P43F laptop cooling pad dual fan portable mount anti-slip 11-17.3" silver
- Holder
- Support up to 17-in…





