Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of ten ultra-small boost modules that step 0.9-5V inputs up to a steady 5V at up to 480mA with 85% efficiency
The KEHIPI 10-piece set provides DC-DC step-up converters that raise inputs from 0.9 V to 5 V up to a regulated 5 V output. Each board measures 11 mm by 10.5 mm by 7.5 mm with a 2.54 mm pin pitch, making them suited for breadboard prototyping and tight enclosures. Hobbyists and engineers working on battery-powered or solar projects gain ten identical modules for parallel testing or spares.
The single specification that determines fit is the maximum output current of 480 mA at 5 V. Conversion efficiency is rated at 85 percent with a 150 kHz switching frequency. Input voltage must never exceed the nominal range, and the source must supply more power than the load draws or the output will sag below 5 V.
At 0.8 V start-up the module delivers only 7 mA, rising to 40–100 mA from 1–1.5 V, 100–150 mA from 1.5–2 V, and 150–380 mA from 2–3 V. Full 380–480 mA headroom appears only when the input exceeds 3 V. Designs needing sustained loads above 480 mA or stable 5 V from very low-voltage cells will require a higher-power converter.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AITRIP |
| Product color | Multicolor |
| Size & build | |
| Product dimensions | 7.5 in × 10.5 in × 0.295 in |
| Product weight | 1 g |
With an input between 2 V and 3 V the output reaches 150-380 mA; above 3 V it can supply 380-480 mA at 5 V.
The pins are on a 2.54 mm pitch, which matches the spacing used on common breadboards and perfboards.
Each module measures 11 mm by 10.5 mm by 7.5 mm and weighs about 1 g.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?