Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of ten LM2596HV buck-converter modules that step AC 5–30 V or DC 5–50 V down to an adjustable 3.3–33 V output at up to 2.2 A continuous current
This pack contains ten LM2596HV step-down converter boards that accept AC 5V-30V or DC 5V-50V input and deliver an adjustable DC 3.3V-33V output. Each module features a plug-in high-voltage regulator with an external heat sink for sustained 2.2A operation. The boards include silk-screen labels on both sides to assist with wiring.
Confirm that your supply voltage falls within the AC 5V-30V or DC 5V-50V range before connecting. The output can be tuned between 3.3V and 33V, but the achievable voltage depends on the specific input level used. Ensure your load does not exceed the 2.2A continuous current rating for reliable long-term performance.
The modules mount directly onto perfboard or terminal strips and require only an input source and a downstream load such as a microcontroller, sensor array or LED driver. The on-board rectifier bridge allows direct AC connection while the DC port offers an alternative feed. This frees the builder from designing a custom regulator circuit for common 12V, 15V or 24V rails.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AITRIP |
| Product color | 10PCS |
The pack contains ten LM2596HV buck converter boards with onboard rectifier bridge, DC input terminals and a heatsink; you only need to supply an AC 5-30 V or DC 5-50 V source and solder wires to the labelled pads.
Turn the onboard potentiometer until the multimeter reads the exact voltage your load requires — 3.3 V, 5 V, 12 V, 15 V or 24 V are all within the 3.3-33 V adjustment span.
With the fitted heatsink the board can deliver 2.2 A continuously; brief peaks up to 3 A are possible, but sustained higher current requires additional airflow or a larger heatsink.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?