Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual-channel 12 V 15 A regulated switching supply with selectable 110 V/220 V input, adjustable output ±15 % and full protection suite for LED strips, CCTV and indoor electronics
The KEHIPI adapter converts AC 110V or 220V input into dual-channel DC 12V output. Each channel delivers up to 15A and 180W, while the combined total is rated at 15A and 120W. It suits LED strips, CCTV systems and similar 12V projects. Indoor use only.
Output voltage is adjustable by ±15% via a yellow trimmer. Maximum continuous draw should not exceed 80% of full load, or 12A and 144W per channel. Built-in protections cover over-voltage, over-current, overload, over-temperature and short-circuit events. Auto-recovery activates after roughly 10 minutes if protection triggers.
A black slide switch selects 110V or 220V AC input; set correctly before plugging in. No power cord, wiring cables, on/off switch or mounting screws are included. Professional installation by a qualified electrician is recommended. Verify your devices draw less than 12A each and confirm indoor placement.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Henxlco |
| Model name | 15 |
| Part number | 15 |
| Product color | Black |
| Size & build | |
| Product dimensions | 8.2 in × 4.0 in × 1.9 in |
Each channel can deliver up to 15A 180W, but the combined total is capped at 15A 120W. Use one channel for a single load up to 12A 144W; use both channels only when the sum of both loads stays within the 120W total.
The 180 W figure is the per-channel peak. In practice you should not exceed 80% of that, so plan for a maximum continuous draw of 144 W on any one channel and 120 W across both channels together.
A physical switch on the unit selects either 110 V or 220 V AC input. Set it to the left for 110 V (USA/CA) or right for 220 V before connecting mains power; the adapter does not auto-range.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?