Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 4.8-35 V DC input to ±15 V dual output at 660 mA for op-amps and sensors
The KEHIPI 2001708005 is a DC-DC buck-boost module that accepts 4.8–35 V input and produces a positive-negative ±15 V rail at up to 660 mA. It targets designers powering operational amplifiers, sensors or audio front-ends from a single supply.
The converter operates from 4.8 V to 35 V and tolerates brief excursions to 40 V, but the enable pin must not share the VIN potential or the output becomes unstable. Short-circuit protection is self-resetting yet cannot survive prolonged shorting, and a minimum load of 30 mA is required for regulation.
Rated output is 660 mA per rail with typical efficiency of 88 % at 24 V input, while ripple stays at 35 mV / 30 mV under full load. At lower input voltages the usable current drops according to the derating curve, so high-current designs must verify the curve before committing to the 660 mA figure.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DROK |
| Model name | 2001708005 |
| Part number | 2001708005 |
| Product color | Black Blue |
| Size & build | |
| Product dimensions | 12.5 in × 27.5 in × 12.5 in |
| Product weight | 1.02 oz |
This module delivers ±15 V at 660 mA per rail with a 30 mA minimum load; choose it when your op-amp or sensor circuit stays within that current envelope.
At 24 V input the converter reaches 88 % conversion efficiency, so roughly 12 % of input power becomes heat while supplying full ±15 V output.
Operation is specified from 4.8 V to 35 V DC; below 4.8 V the regulator cannot maintain ±15 V, and above 35 V the input voltage exceeds the rated maximum.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?