Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Waterproof 200W 12V driver with automatic protection and IP67 aluminium housing for outdoor LED strips
The KEHIPI 200W LED driver converts 90-130V AC mains to a steady 12V DC output rated at 16.6A. It suits installers who need a single constant-voltage source for LED strips, security cameras, routers or similar 12V loads that stay within the 200W limit. The unit is not dimmable, so it cannot serve projects that require on-board brightness control.
An 88% input efficiency keeps waste heat modest, while the fully encapsulated aluminium housing relies on free-air convection — no fan, no audible noise. The IP67-rated enclosure is specified for continuous operation from -20? to +60? ambient at 20%-90% relative humidity. Protection circuits cover short circuit, overload, over-voltage, over-current and over-temperature using hiccup-mode auto-recovery.
A fixed 3.3ft input cable with a 3-prong plug is moulded into the housing, so no separate IEC lead is required and the seal remains intact. The 8.62in x 2.71in x 1.57in silver case weighs 2.6lb and mounts flat against a surface. No configuration software, RGB controller or additional wiring harnesses are included in the package.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NIYIPXL |
| Model name | PFH |
| Product type | Modern |
| Product color | Silver |
| Size & build | |
| Product dimensions | 8.62 in × 2.71 in × 1.57 in |
Mount the driver on a flat surface using the housing screw holes; the 3.3 ft input cable with 3-prong plug connects to a 90-130V AC outlet, while the output wires run to your 12V DC load, keeping total draw at or below 200W.
No internal maintenance is required; periodically wipe the aluminum case to keep airflow clear, verify the cable jacket and connectors stay intact, and confirm the 88% efficiency rating by checking that the housing temperature stays within the -20 to +60°C range.
When the connected load exceeds 200W or 16.6A, the hiccup-mode circuit cuts output and auto-recovers once the overload is removed; sustained operation at full load is rated up to 60°C ambient.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?