Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of 20 adjustable buck converters stepping 4–40 V down to 1.25–37 V with LED voltmeter and 3 A peak output
This pack contains twenty LM2596 step-down modules that accept a 4-40V DC input and produce an adjustable 1.25-37V output. Each board integrates a three-digit LED voltmeter and a multi-turn potentiometer for voltage trimming. The bundle suits hobbyists, repair technicians and small-scale builders who need multiple identical regulators for test benches, battery chargers or LED drivers.
The regulator requires the supply to sit at least 1.5V above the desired output to maintain regulation. Continuous current is rated at 2A with a 3A peak allowance; loads above 2A or 15W demand an external heatsink. The internal oscillator runs at 150kHz, and the on-board meter only activates once the input exceeds 4V, so very low-voltage sources cannot be monitored.
Built-in safeguards cover reverse polarity, overheating and short-circuit events, reducing the chance of damage during wiring mistakes. Calibration mode lets you trim the displayed input and output readings independently to ±0.5V accuracy, and the setting survives power cycles. The display can be switched off with a long press to save power, and a short press restores it instantly.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DROK |
The pack contains 20 LM2596 buck converters, each accepting an input voltage of 4-40V.
Each module delivers a rated 2A continuous output current, with a 3A maximum; for loads above 2A adequate heatsinking is advised.
The 150kHz second-generation regulator enables high conversion efficiency and minimal power loss, capping the switching speed at 150kHz for stable step-down operation.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?