Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two USB-C PD trigger boards deliver up to 100 W at 20 V using hardware IC protocol for stable laptop charging from power banks
This kit provides two ZY12PDN trigger boards that negotiate power delivery with a USB-C source and output adjustable DC voltage through a 5.08 mm screw terminal. It is intended for engineers and hobbyists who need to power DC devices from a PD-capable charger or power bank.
The hardware protocol IC maintains a stable PD 2.0 or 3.0 handshake so the board can continuously deliver up to 100W at 20V and 5A without dropping the negotiated voltage. A large ceramic capacitor, TVS surge protection and a low-resistance copper construction keep temperatures controlled during extended operation.
The trigger negotiates only PD 2.0 or 3.0 profiles from 3V to 20V and does not support QC or other proprietary fast-charge protocols. Users must ensure the connected load can withstand the selected voltage because the board provides no step-down regulation or current limiting beyond the source capability.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AITRIP |
| Product color | ZY12PDN USB Board |
| Size & build | |
| Build details | Copper |
The board is rated for up to 100 W at 20 V and 5 A; any heat produced depends on the connected cable and load, not on the trigger circuit alone.
You need a USB-C Power Delivery 2.0 or 3.0 source capable of the desired voltage, plus a DC cable soldered to either the 5.08 mm screw terminals or the USB-A footprint on the board.
No — the board only negotiates PD 2.0 or 3.0 voltages; it does not support Quick Charge or other proprietary fast-charge protocols.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?