Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Eight buck converter modules step 4.5–28 V inputs down to an adjustable 0.8–20 V output at up to 3 A with 92 % efficiency
The KEHIPI pack supplies eight MP1584EN step-down modules for hobbyists and engineers who need multiple adjustable rails in prototypes, test rigs or permanent low-power installations. Each board accepts 4.5 V to 28 V in and delivers 0.8 V to 20 V out, making it suitable for Arduino, Raspberry Pi and similar micro-controller projects.
Typical output current is 1.8 A with a 3.0 A maximum, while peak conversion efficiency reaches 92 %. Output ripple stays below 30 mV and the switching frequency runs at 1 MHz typically, up to 1.5 MHz. The parts are rated for continuous operation from -45 °C to 85 °C without additional cooling.
Voltage is set by turning the onboard potentiometer while monitoring the output with a multimeter. The compact green PCB leaves ample breadboard space and the wide input range lets a single 12 V or 24 V source feed several different logic levels. No heatsink, fan or specific enclosure size is mandated by the module itself.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AITRIP |
| Model name | MP1584EN |
| Part number | EC1691338 |
| Product color | Green Adjustable |
Connect a 4.5 V to 28 V source to the input pads, then turn the onboard potentiometer with a small screwdriver while measuring the output with a multimeter until you reach the desired 0.8 V to 20 V level; skipping the live measurement often leaves the output at the factory default.
The MP1584EN has no user-serviceable parts; if output ripple rises above 30 mV or the converter no longer regulates within the 0.8 V to 20 V range after prolonged operation at up to 3 A, replace the entire module.
Thermal protection engages once the board temperature reaches 85 °C, which can occur before the 3 A current ceiling if input voltage is near 28 V and airflow is limited.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?