Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A pack of ten miniature synchronous buck modules that step DC 4.5-20V down to an adjustable 1-16V or fixed 1.8V, 2.5V, 3.3V, 5V, 9V or 12V at up to 3A peak
This set provides ten identical non-isolated step-down modules that accept a DC input from 4.5 V to 20 V and deliver an adjustable output between 1 V and 16 V or a fixed output of 1.8 V, 2.5 V, 3.3 V, 5 V, 9 V or 12 V. Each board is rated for a peak current of 3 A with a long-term limit of 2 A and a maximum power of 10 W. The modules are designed for engineers, hobbyists and technicians who need compact voltage reduction in prototypes or permanent installations.
Every unit arrives with 2.54 mm pitch welding holes for input, output and the enable pin, so integration requires soldering rather than plug-in headers. The enable port defaults to active-high operation with an internal pull-up to the input rail, allowing simple on-off control from a 2 V to 5 V logic signal. Short-circuit protection is built in, though sustained shorts should be avoided.
The synchronous rectification topology reaches up to 97 % conversion efficiency, typically exceeding 90 % when stepping 12 V down to 5 V at 2 A. Output ripple is typically 20 mV and the dynamic response settles within 5 % in 200 µs. The board operates from -40 °C to +85 °C, with derating at higher ambient temperatures. Buyers who need isolated regulation, reverse-input protection or over-voltage protection should look elsewhere.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DROK |
| Product color | Black |
| Size & build | |
| Product weight | 0.634 oz |
The board uses welded connections on 2.54 mm spaced pads and an integrated enable pin; no user-replaceable parts are specified, so the module itself is the service unit.
Continuous operation is rated within 2 A; at 5 V output the 10 W ceiling is reached at 2 A, so the current limit appears first.
Typical efficiency exceeds 90 % for 12 V to 5 V at 2 A, so roughly 1 W is lost as heat per module under those conditions.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?