Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual USB buck converter steps 10-32 V input to 3-12 V output with QC 3.0 fast charging at 2.5 A per port
This module steps a DC input between 10 V and 32 V down to a default 5 V output. When a connected device triggers a quick-charge handshake the output automatically adjusts within a 3 V to 12 V range. Each of the two USB ports is rated for 2.5 A and 30 W. The pack contains two identical boards.
The input side includes a fuse that protects the converter during prolonged operation. Output over-voltage protection caps the voltage at 13 V even if the control chip fails. Rated current of 2.5 A per port is available only when the attached device requests it; actual draw falls as the battery approaches full charge.
No active cooling is fitted so heat dissipation relies on the board layout and ambient airflow. The converter operates silently because there are no moving parts. Power drawn from the source scales with the combined load on both USB ports and the conversion efficiency at the selected output voltage.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DROK |
| Part number | FBA200407 2x |
The module includes output over-voltage protection capped at 13V and an input fuse, which limits excess power dissipation during sustained 30W operation.
A DC supply between 10V and 32V — such as a 12V or 24V battery or regulated adapter — must be connected to the input terminals.
Yes, each port defaults to 5V and only shifts to 3-12V after detecting a compatible QC 2.0, QC 3.0, AFC, FCP, SFCP or MTK PE handshake.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?