Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Five buck-converter modules step DC input from 4.5 V to 40 V down to an adjustable 1.25 V–37 V output at up to 3 A with 92 % peak efficiency
This pack supplies five identical LM2596 buck converter modules, each with an integrated LED voltmeter. They accept a DC input between 4.5 V and 40 V and deliver an adjustable output from 1.25 V to 37 V at up to 3 A. The modules suit hobbyists building variable bench supplies, automotive voltage reducers or battery-powered equipment.
Each board includes a digital tube voltmeter that shows the output voltage in real time, removing the need for a separate multimeter during setup. Built-in over-temperature protection, current limiting and output short-circuit protection shut the converter down before damage occurs. Peak conversion efficiency reaches 92 % at 150 kHz switching frequency.
Verify that your source voltage stays at least 1.5 V above the desired output across the full load range. The 20 W maximum output power means sustained loads near 3 A will require added heatsinking or forced airflow. Confirm the 6.1 cm length and 3.4 cm width fit your enclosure and that wiring reaches the clearly marked IN+, IN-, OUT+ and OUT- pads.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AITRIP |
| Model name | LM2596 / Digital Tube Voltmeter |
| Product color | LM2596 Display |
| Size & build | |
| Product dimensions | 12.0 in × 3.4 in × 12.0 in |
The supplier recommends staying within 2.0 A for continuous use; above that, extra heat dissipation is required to avoid triggering the built-in over-temperature protection.
The input must stay at least 1.5 V higher than the adjusted output, otherwise the step-down function stops working.
The operating temperature range is -45 °C to +85 °C; sustained operation near the upper end will activate the over-temperature safeguard.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?