Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adjustable buck converter steps DC 4.0-32.0 V down to 1.25-30.0 V at up to 3 A with LED readout of voltage and current, pack of two
This pack contains two adjustable DC-DC step-down modules based on the LM2596 topology. Each unit accepts an input range of 4.0V to 32.0V and delivers a regulated output from 1.25V to 30.0V at up to 3A peak. A built-in LED display shows input voltage, output voltage and output current, selectable via a MODE button. An ON/OFF button toggles the output without disconnecting power leads.
The modules suit hobbyists, students and engineers who need a compact, readable buck converter for breadboard work, battery projects or fixed-voltage rails up to 20W continuous. They are not intended for buyers who require isolated outputs, synchronous rectification for higher efficiency, or continuous currents above 1.5A without additional heatsinking. The screw-terminal wiring and potentiometer adjustment favour manual setup over automated control.
The key specification is the 1.5A continuous operating rating, with total output power kept within 20W. Peak current reaches 3A only for short durations. If the load regularly exceeds 1.5A or 20W, the regulator will overheat and shut down. Verify the actual load profile against this limit before committing the module to a design.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DROK |
| Part number | 180057 2x |
| Size & build | |
| Product dimensions | 1.3 in × 3.4 in × 1.3 in |
Connect IN+ and IN- to a DC source between 4.0V and 32.0V, then connect OUT+ and OUT- to the load. The step often missed is setting the output voltage with the screw potentiometer before powering the load, and remembering the output must stay at least 2V below the input.
The module has no user-serviceable parts and no specified wear items. Keep the screw potentiometer and buttons free of dust, ensure wiring stays tight, and operate within the 1.5A continuous current limit so the 20W power ceiling is not exceeded.
The continuous operating current of 1.5A (total output power within 20W) is the first sustained-use limit; exceeding it risks overheating even though the peak rating is 3A.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?