Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Supplies 12 V at up to 2 A through 5.5 mm and 3.5 mm barrel plugs on a 4 ft cord
This Kenuco 12V 2A power adapter converts 100-240V AC mains input at 50-60Hz into a regulated 12V DC output up to 24W. It ships with two interchangeable barrel connectors: a 5.5mm x 2.5mm plug and a 3.5mm x 1.35mm plug, both centre-positive. A 4ft cable length provides flexible placement for CCTV cameras, LED lighting, routers, and similar 12V devices.
The unit serves as a direct replacement for original 12V power supplies rated at 2A, 1.5A, 1A, .75A or .5A, provided the device uses one of the two supplied connector sizes. It will not fit equipment that requires a 5.5mm x 2.1mm barrel jack. The wide 100-240V input range makes it suitable for use in regions with 100V, 120V, 220V or 240V mains without a separate voltage selector.
Rated for a maximum continuous output of 2A at 12V, the switching transformer maintains regulation during sustained operation rather than only in short bursts. Class 2 construction and FCC/UL listings indicate compliance with safety standards for prolonged use. The 1.2 metre total cable run minimises voltage drop when the adapter powers security cameras, modems, or audio equipment continuously.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | AC Adapter |
The cable terminates in two centre-positive barrel plugs: 5.5 mm x 2.5 mm x 10 mm and 3.5 mm x 1.35 mm x 8 mm.
Confirm the mains voltage is between 100 V and 240 V at 50 Hz or 60 Hz before connecting the AC cord.
Replace it if the output voltage drops below 12 V or the unit becomes unusually hot during 24-hour operation.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?