Khadas Balanced RCA to XLR-3 Adapter Cable 0.2 m
Balanced RCA-to-XLR adapter cable uses 6N OCC copper conductors with braided OFC shielding for short interconnect runs
- Overall length8 in (20.3 cm)
Length 8"
- 8"$34.99
- 39"$49.99
- Balanced connection via Neutrik XLR-3 male with gold contacts
- High-purity 6N OCC single-crystal copper conductors at 99.9999 %
- Braided oxygen-free copper shielding with 112 strands of 0.10 mm
- Short 0.2 m adapter length reduces signal path
- Cotton yarn filler and braided cloth jacket add mechanical durability
Balanced RCA to XLR Adapter
This pair of 0.2 m adapter cables connects Khadas Tone2 or Tone2 Pro DACs to equipment with XLR inputs. Each cable uses a Khadas balanced RCA plug on one end and a Neutrik NC3MXX-HE XLR-3 male connector with gold contacts on the other. They are sold as a matched white and red pair for stereo use.
Length and Shielding Constraints
The 0.2 m length is intended for short runs between stacked components and cannot span longer distances between racks. The braided oxygen-free copper shield and twisted-pair conductors are designed to reject noise on balanced lines, but the fixed length means you cannot adjust routing without adding extensions that may alter impedance.
Check Connector Types Before Ordering
Verify that your source device provides balanced RCA outputs matching the Khadas KRP-B01 plug and that your amplifier or interface accepts XLR-3 male connectors. The adapters will not fit standard single-ended RCA jacks or XLR female ports, and they are not compatible with unbalanced RCA-only equipment.
How it compares
Measured against everything we stock in RCA Stereo Audio Cables, at today’s prices. Recalculated every night.
- Price $34.99
- Pricier than about 92% of the 294 comparable items (median $12.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Overall length | 8 in (20.3 cm) |
Other versions of this model
1 more in the same range
Questions about this item
Should I choose the 0.2 m adapter or the 1.0 m cable?
Choose 0.2 m for direct, space-saving connections between stacked gear; choose 1.0 m when components sit further apart and you need reach.
What does the 6.0 mm outer diameter mean once the cable is installed?
At 6.0 mm the cable is slim enough to route behind tight racks yet thick enough to house braided shielding and cotton filler without kinking.
How does the Neutrik XLR-3 male connector with gold contacts cap the signal path in practice?
The gold-plated Neutrik XLR-3 male locks securely, resists oxidation, and maintains low-contact resistance for balanced audio transfer.
More in RCA Stereo Audio Cables
Similar items
Tripp Lite P316-06N 6" 3.5mm to 2 RCA Y splitter cable
- Others
- Black
Comprehensive Cable and Connectivity 2PP-2PP-50ST 50 ft rca cable
- Connector Type 1: R…
- Black
Cables Unlimited AUD-1600-12 12 ft RCA stereo cable
- Cable Connectors
- Black
Cables Unlimited ZIP-AUDIO-IP3 retractable 3.5 mm to RCA cable 3.94 ft
- RCA Component
- White






