DELL NU209 3.7V 1892mAh Lithium-Ion Battery Perc 5i 6i PowerEdge 1950 2900 2950
- Lithium-Ion
- 3.7 V
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
7.4 V 28.1 Wh 3800 mAh Li-ion replacement battery for Zebra RW420 and QL420 Plus mobile printers
This KingSener AT16293-1 battery replaces the original CT17102-2 pack in Zebra RW420 and Ql420 plus mobile printers. It is a new lithium-ion unit rated at 7.4V with a capacity of 28.1WH and 3800mAh. The black casing matches the factory appearance and fits the printer's battery compartment directly. Workers who need reliable power for field printing tasks will find this a direct swap.
Lithium-ion chemistry keeps self-discharge low so the pack holds charge between shifts. Normal operation produces no audible noise and the cell temperature stays within safe limits during typical print jobs. The 3800mAh rating supports extended mobile use without frequent recharging. Power draw scales with print volume and radio activity rather than the battery itself.
The pack slides into the existing battery bay on compatible Zebra printers with no tools required. No extra cables or adapters are needed because the connector matches the original part. Removing the old cell frees up the charger for other packs in a multi-device pool. Buyers who need a different voltage or a higher capacity for other printer models should look elsewhere.
Measured against everything we stock in Laptop Chargers & Batteries, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | KingSener |
| Model name | AT16293-1 |
| Part number | AT16293-1 CT17102-2 |
| Power | |
| Battery voltage rating | 7.4 V |
| Battery capacity | 28.1WH/3800 mAh |
Power off the printer, open the battery compartment latch, remove the old pack, insert the 7.4V 3800mAh unit with contacts aligned, close the latch, then charge fully before first use.
Keep the contacts clean, avoid deep discharge, store at roughly half charge if unused for weeks, and replace the pack when run-time no longer covers a full shift.
The 3800mAh capacity determines how long the RW420 or QL420 plus can print before the voltage drops and the printer shuts down to protect the cells.
More in Laptop Chargers & Batteries
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?