KingSpec X400-1TB-2280 internal SSD 1TB PCIe 4.0 7400MB/s
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1TB M.2 2280 NVMe drive with PCIe 5.0 x4 interface delivering up to 14000 MBps read and 13000 MBps write speeds
Generation Gen 5
This KingSpec X500 drive is a 1TB internal solid-state drive built on the M.2 2280 form factor. It connects through a PCI-Express 5.0 interface using the NVMe 2.0 protocol and uses 3D NAND flash with a dedicated DRAM cache. The drive is made for consumer desktops and workstations that need very high sequential throughput.
The SSD suits systems with Intel Ultra 9 or AMD Ryzen 9000 series processors on motherboards that expose a PCIe 5.0 M.2 slot. Its 14,000MB/s read and 13,000MB/s write speeds benefit 4K and 8K video editing, 3D rendering, AI dataset crunching and competitive gaming. Older platforms limited to PCIe 4.0 or 3.0 will not reach these transfer rates, so builders on those chipsets should consider a drive matched to their interface.
The single specification that determines whether this is the right part is the maximum sequential read speed of 14,000MB/s. If the target motherboard and CPU combination cannot deliver a PCIe 5.0 x4 link, the drive will operate at the lower speed of that link and the extra headroom goes unused. Match the drive to a verified PCIe 5.0 M.2 slot to realise the rated performance.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | KingSpec |
| Product line | ONEBOOM |
| Model name | X500-1 TB-2280 |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 14,000 MB/s |
| Sequential write speed | Up to 13,000 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Write endurance | 600 TB |
| Connectivity | |
| Connection protocol | NVMe 2.0 |
| Ports & slots | |
| Interface type | PCI-Express 5.0 |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 2 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 5g |
| Shipping weight | 0.05 kg |
| Package size | 144 × 91 × 17 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -20 °C to 75 °C |
| More details | |
| Mean time between failures | 1,000,000 h |
Other versions of this model
The drive reaches up to 14000 MBps sequential read on the PCIe 5.0 x4 link, with NVMe 2.0 protocol overhead already accounted for in that figure.
The module measures 22 mm wide, 80 mm long and 2 mm thick; the composite graphene copper foil adds no extra height, so a standard 2280 slot with 2 mm clearance fits it.
Insert the M.2 2280 card at an angle into the keyed slot, press flat and secure with the motherboard screw; the step often missed is removing any pre-fitted heatsink sticker so the graphene copper foil contacts the board thermal pad.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?