Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32GB DDR5 RDIMM running at 4800 MHz with CL40 latency, registered ECC and 1.10V operation
This 32GB DDR5 RDIMM delivers 4800 MHz speed with CL40 timing at 1.10V. It is built for servers and workstations that require registered signal processing and error correction. The single-rank 1Rx4 layout fits standard 288-pin DDR5 slots.
The module replaces lower-speed DDR5 memory or unbuffered sticks that lack ECC protection. The jump is worth it when data integrity and registered buffering are required for stable operation under sustained workloads. Systems limited to lower DDR5 speeds will not reach the rated 4800 MHz without compatible platform support.
The bare module sits in registered DDR5 channels and leaves clearance for tight heatsink spacing. It needs a motherboard that supports registered ECC DDR5 at 1.10V. The single-rank design frees rank slots for additional modules on multi-channel server boards.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KSM48R40BS4TMI-32MDI |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Memory | |
| CAS latency | CL40 |
| Memory timings | 40-39-39 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 165 × 51 × 8 mm |
The module uses the standard 288-pin DDR5 RDIMM form factor. It fits any server board with DDR5 RDIMM slots keyed for registered memory.
Enable ECC and registered mode in the BIOS after seating the DIMM. Many builders forget to activate both, leaving error correction and signal buffering disabled.
No spreader is included. In typical server chassis with directed airflow the bare module runs within its 1.10V thermal envelope, so extra cooling is not required.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?