Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR4-3200 ECC registered DIMM with CL22 latency and KTH-PL432/32G part code for server workloads
This 32 GB DDR4 module runs at 3200 MHz with CL22 latency and 1.20 V operation. It uses a 288-pin DIMM form factor and includes ECC with registered signal processing for data integrity in server environments.
This module fits systems that require registered DDR4 memory with ECC support. It is not for desktop boards that accept only unbuffered non-ECC DIMMs, nor for platforms limited to lower-density or single-rank configurations.
Align the notch with the slot key and press firmly until the retention clips lock. Ensure the platform supports registered ECC DDR4 and that the BIOS is set to the correct voltage and speed; mismatched memory types or disabled ECC in firmware are the most common issues.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KTH-PL432/32G |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Memory profiles | Intel XMP 2.0 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Size & build | |
| Shipping weight | 0.45 kg |
| Package size | 58 × 51 × 3 mm |
Yes, the module is a 288-pin DDR4 DIMM with ECC and Registered signal processing that runs at 1.20 V, so the board must provide a matching DDR4 slot with ECC Registered support.
The module will down-clock to the speed of the slowest installed DDR4 memory, but all slots must run in Registered ECC mode; mixing ranks or speeds may limit maximum capacity or stability.
Check the BIOS memory information or a tool such as CPU-Z; it should report 3200 MT/s, CAS latency 22, 1.20 V and Registered ECC operation for this module.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?