Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB unbuffered DDR3 kit with four 8 GB modules running at 1333 MHz and CL9 latency
This kit supplies 32GB of DDR3 memory in four 8GB unbuffered modules running at 1333MHz with CL9 latency. It targets administrators upgrading or repairing legacy servers that require 240-pin DDR3 SDRAM at 1.50V without ECC.
Operating at the standard 1.50V DDR3 voltage, the modules draw typical power for this generation and speed. Unbuffered designs place no extra load on the memory controller, so thermal output remains comparable to other DDR3 1333 DIMMs under normal server workloads.
Populating four slots at once lets the memory controller run in its optimal multi-channel configuration where the platform supports it. The matched 8GB sticks simplify installation and reduce the risk of timing mismatches that can occur when mixing modules of different capacities or latencies.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KVR1333D3N9K4/32G |
| Total capacity | 32 GB (4 × 8 GB) |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1333 |
| Memory | |
| CAS latency | CL9 |
| ECC support | No |
| Buffer type | Unbuffered |
| Power | |
| Rated voltage | 1.5 V |
| Size & build | |
| Shipping weight | 0.07 kg |
| Package size | 160 × 104 × 51 mm |
Power down the server, open the chassis, align each module's notch with the DIMM slot key, press firmly until the retention clips click on both sides, then populate all four slots for the full 32 GB capacity.
No routine maintenance is required; if a module fails it must be replaced with an identical 8 GB DDR3 1333 CL9 1.50 V unbuffered stick to keep the kit matched.
The CL9 latency at 1.50 V sets the timing ceiling; sustained throughput cannot exceed the DDR3 1333 data rate regardless of workload duration.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?