Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR3 1600 ECC registered memory with CL11 latency for server stability
This 16 GB DDR3 module is built for servers that demand maximum stability and continuous operation. It uses registered ECC technology to detect and correct data errors in real time. The product is suited for IT professionals managing infrastructure where downtime is unacceptable.
The memory runs at DDR3 1600 (PC3 12800) with a CAS latency of CL11 and a voltage of 1.50 V. Registered buffering adds one clock cycle to command timing, which is standard for this class of module. Systems must support registered ECC DDR3 to use this memory; consumer platforms that accept only unbuffered non-ECC DIMMs cannot use it.
Installation follows the standard 240-pin DDR3 DIMM procedure: align the notch, press firmly until the latches click, and verify detection in BIOS. The most common issue is mixing registered modules with unbuffered memory or populating slots in an order the server firmware does not support. The advanced Product Change Notification process helps maintain consistent component sourcing for future upgrades.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KVR16R11D4/16HA |
| Total capacity | 16 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Power | |
| Rated voltage | 1.5 V |
| Size & build | |
| Shipping weight | 0.02 kg |
| Package size | 171 × 56 × 17 mm |
This module provides 16GB per stick at DDR3 1600 with ECC Registered operation; match total capacity to your motherboard's slot count and maximum supported memory.
It runs at 1600 MT/s with CL11 latency and 1.50V, giving the rated throughput for compatible DDR3 platforms when populated according to the board's memory-configuration rules.
The 240-pin DDR3 form factor with registered ECC requires a server chipset that supports registered modules; speed will not exceed DDR3 1600 and the memory controller must be DDR3 compatible.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?