Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1 GB DDR2 400 server module with ECC and registered buffering for error-correcting stability
This module provides 1GB of DDR2 400 (PC2 3200) capacity with ECC and registered buffering. It is intended for servers and workstations that require registered memory for stability. The CL3 latency and 1.80V operation match the JEDEC standard for this speed grade. It is not suitable for desktop boards that accept only unbuffered non-ECC modules.
The DDR2 400 standard tops out at 400 MT/s with a 240-pin form factor and 1.80V signalling. Registered modules add a clock cycle of buffering, so the memory controller must support registered operation. ECC functionality also requires a chipset that can generate and check the extra parity bits. Boards limited to unbuffered memory cannot use this module.
Verify that your server motherboard lists DDR2 400 registered ECC support in its qualified vendor list. Confirm the board uses 240-pin DDR2 slots and that the BIOS enables registered memory operation. Check how many ranks per channel the platform allows so the total population stays within the controller limit. Ensure the system does not require heat-spreader-equipped modules for thermal management.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KVR400D2D8R3/1G |
| Total capacity | 1 GB |
| Product type | 240-Pin DDR2 SDRAM |
| Performance | |
| Rated speed | DDR2 400 (PC2 3200) |
| Memory | |
| CAS latency | CL3 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.8 V |
| Size & build | |
| Shipping weight | 0.04 kg |
| Package size | 170 × 56 × 13 mm |
This module is a single 1GB stick. If your server has free 240-pin slots and the board accepts registered DDR2, add one or more of these to reach the total memory you need.
The memory will run at 400 MT/s, delivering up to 3200 MB/s of theoretical bandwidth at CL3 latency and 1.80 V.
Yes. The 240-pin DDR2 slot caps the module at 400 MT/s (PC2 3200), so the system cannot run this memory faster than that rate.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?