Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4 GB DDR2 667 ECC fully buffered DIMM with CL5 latency and heat spreader for compatible Intel servers
This 4 GB DDR2 module targets administrators maintaining legacy Intel SR1500AL or SR1500ALSAS servers. Fully Buffered architecture with ECC protects data integrity in multi-socket environments where uptime is critical. The 240-pin form factor fits the specific DIMM slots used by these platforms.
Replaces non-ECC or registered DDR2 modules that lack the advanced memory buffer required by the chipset. The jump is worth it when the server BIOS reports memory errors or the workload demands the signal integrity of Fully Buffered technology. Dual Rank organisation increases density per slot without changing the memory controller configuration.
The PC2 5300 standard caps throughput at the rated 667 MT/s with CL5 latency at 1.80 V. No higher DDR2 speeds or later DDR generations are electrically compatible with this slot. Capacity is limited to the module's 4 GB per DIMM and the maximum rank count the memory controller supports.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KVR667D2D4F5/4GI |
| Total capacity | 4 GB |
| Product type | 240-Pin DDR2 SDRAM |
| Performance | |
| Rated speed | DDR2 667 (PC2 5300) |
| Memory | |
| CAS latency | CL5 |
| ECC support | Yes |
| Buffer type | Fully Buffered |
| Heat spreader | Yes |
| Power | |
| Rated voltage | 1.8 V |
| Size & build | |
| Shipping weight | 0.03 kg |
| Package size | 171 × 57 × 14 mm |
Yes — it uses the standard 240-pin DDR2 form factor, so it fits any slot keyed for DDR2 667.
Install the module, then enter BIOS and set the memory mode to ECC or Fully Buffered; skipping that step leaves error correction inactive.
The spreader is passive and maintenance-free; only remove dust with compressed air during routine server cleaning.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?