Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2GB DDR2 667 ECC fully buffered server module with CL5 latency, 1.80V operation and a heat spreader
This 2 GB DDR2 module targets administrators maintaining legacy servers that require fully buffered ECC memory. The dual-rank design delivers registered error correction for data integrity in multi-socket platforms. It is not suited for desktop boards that lack chipset support for fully buffered DIMMs or for systems needing higher density per slot.
Operating at 1.80 V with an integrated heat spreader, the module runs cool under typical server workloads. The registered buffer adds minimal latency while stabilising the memory bus across multiple ranks. No active cooling is required beyond standard chassis airflow. Acoustic impact is negligible in rack environments.
The heat spreader is the only bundled hardware; it improves thermal headroom without altering slot clearance. No configuration utilities, firmware tools or diagnostic software accompany the kit. Installation is limited to seating the 240-pin DIMM and enabling ECC in the system BIOS.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Product line | ValueRAM |
| Model name | KVR667D2D8F5/2G |
| Total capacity | 2 GB |
| Product type | 240-Pin DDR2 SDRAM |
| Performance | |
| Rated speed | DDR2 667 (PC2 5300) |
| Memory | |
| CAS latency | CL5 |
| ECC support | Yes |
| Buffer type | Fully Buffered |
| Heat spreader | Yes |
| Power | |
| Rated voltage | 1.8 V |
| Size & build | |
| Shipping weight | 0.07 kg |
| Package size | 171 × 57 × 13 mm |
Align the notch on the gold edge with the key in the slot, press firmly until both retaining clips click shut, and verify the system detects the full 2 GB at 667 MHz; the step often missed is seating the module evenly so both clips engage simultaneously.
No routine maintenance is required; if a memory test eventually reports uncorrectable errors the module must be replaced because DDR2 components are no longer produced.
The DDR2 667 bandwidth ceiling is reached before thermal throttling, so throughput plateaus at the rated 5300 MT/s transfer rate during prolonged workloads.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?