Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1GB DDR2 667 ECC fully buffered server memory with CL5 latency and 1.80V operation
This 1 GB Kingston module uses 240-pin DDR2 SDRAM running at 667 MT/s with CL5 latency and 1.80 V operation. It is built as a single-rank, fully buffered stick with ECC for data integrity in server workloads.
The module operates at the standard 1.80 V for DDR2, drawing modest power typical for this generation. Fully buffered architecture adds an advanced memory buffer chip that manages signal integrity, contributing slightly more heat than unbuffered equivalents. Passive cooling via system airflow is sufficient; no active cooling is required.
The Intel Compatibility Tested badge means the module has passed validation on Intel server platforms, reducing the risk of POST failures or timing mismatches. Buyers who need larger capacities or higher speeds must select different modules, as this stick is fixed at 1 GB and 667 MT/s.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | KVR667D2S8F5/1GI |
| Total capacity | 1 GB |
| Product type | 240-Pin DDR2 SDRAM |
| Performance | |
| Rated speed | DDR2 667 |
| Memory | |
| CAS latency | CL5 |
| ECC support | Yes |
| Buffer type | Fully Buffered |
| Power | |
| Rated voltage | 1.8 V |
| Size & build | |
| Shipping weight | 0.05 kg |
| Package size | 171 × 57 × 17 mm |
Align the notch on the 240-pin DDR2 stick with the slot key, press down firmly until both side clips snap shut, and verify the system detects the full 1GB at DDR2 667 speed.
No routine maintenance is required; replace the module only if memory diagnostics report uncorrectable ECC errors or the system fails to POST with it installed.
The DDR2 667 bandwidth ceiling is reached before thermal throttling, so sustained throughput tops out at the rated 667 MT/s data rate.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?