BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Water-soluble support filament withstands 100 °C, prints at 235–250 °C, and dissolves without chemicals for complex ABS, POM, or polycarbonate parts
High-T-Lay is a water-soluble support filament designed for printers that run at elevated temperatures. It withstands 100 °C for long periods and prints at 235 to 250 °C with a 50 °C bed. The 2.85 mm diameter suits compatible Bowden and direct-drive systems. Makers printing complex geometries with ABS, POM or polycarbonate gain reliable support removal without chemical solvents.
The spool weighs 0.75 kg and holds to a ± 0.1 mm diameter tolerance for consistent extrusion. It adheres strongly to ABS, POM and polycarbonate, enabling dual-extrusion prints where the model material demands high heat resistance. No heated enclosure or proprietary hardware is required beyond a printer capable of the stated nozzle and bed temperatures. Dissolving occurs in plain water, removing the need for D-Limonene or ventilation for solvent fumes.
The 0.75 kg spool provides enough length for multiple medium-sized prints or a single large job with dense supports. Heat resistance tops out at 100 °C, so it cannot support materials that require sustained chamber or nozzle temperatures above that threshold. The filament is not intended for structural parts or end-use components; it dissolves completely when submerged. Users needing larger spool sizes or different diameters must source separate products.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Lay Filaments |
It withstands temperatures of 100 °C for extended periods, making it suitable for high-temperature technical filaments.
A heated bed at 50 °C is recommended for consistent first-layer adhesion during continuous printing.
It adheres well to ABS, POM and polycarbonate, so you need one of those as your primary model material.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?