Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a PCIe 5.0 MCIO x4 host to E1.S, E1.L, E3.S or E3.L SSDs at 32 GT/s per lane over a 1.6 ft copper cable with integrated 15-pin power
The LetLinkSo LLS-CB-1MC1ED-01 is a 1.6ft cable that links an MCIO x4 host port to a single EDSFF 1C drive connector. It targets server and storage builders who need PCIe 5.0 throughput for E1.S, E1.L, E3.S or E3.L solid-state devices. The assembly carries both signal and 15-pin power through a male-to-male copper conductor.
The 50 cm length fits typical 1U/2U cable routing without excess slack. Male-to-male terminals plug directly into the backplane and drive cage; no adapters or tools are required. Hot-swap capability lets technicians replace drives without powering down the chassis. The only common pitfall is reversing the connector orientation — keyed shrouds prevent damage but demand attention during the first mate.
This cable serves integrators populating EDSFF bays from an MCIO x4 source at 32 GT/s per lane. It is not for environments that rely on SAS signalling or legacy backplanes lacking MCIO ports. Buyers needing multi-drive breakout cables, longer runs for full-rack cabling, or right-angle connectors for tight clearance should look at other configurations.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LetLinkSo |
| Model name | LLS-CB-1MC1ED-01 |
| Product type | PCIe 5.0 |
| Product color | Black |
| Performance | |
| Rated speed | 32 GT/s (per lane) |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x MCIOx4 to 1 x EDSFF |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 1.6 ft(50 cm) |
| Conductor type | Copper Conductor |
Check the link speed reported by the host system or drive firmware; it should show 32 GT/s per lane on the x4 connection.
The cable has a male MCIO x4 connector on one end and a male EDSFF 1C connector with a 15-pin power segment on the other.
It is built for E1.S, E1.L, E3.S and E3.L solid-state drives.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?