BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 310×310 mm, 4 mm glass build plate with a microporous composite coating that expands when heated for strong adhesion and shrinks on cooling for easy print removal.
The LONGER LK5 PRO / LK1 build plate is a 4 mm thick glass sheet sized 310×310 mm for compatible Longer printers. Rounded R5 mm corners and a microporous composite coating give a flat surface rated below .2 mm flatness. It replaces magnetic or PEI sheets for users who want a rigid, dimensionally stable bed. Builders needing a different bed size or a flexible removal surface cannot use this plate.
The coating expands its micro-pores as the bed heats, increasing adhesion so first layers stick without edge curling. When the bed cools the pores shrink, letting small prints release by hand and large prints come off with basic tools, cutting removal time by at least 40 %. No glue stick, hairspray or extra surface preparation is required for typical filaments.
The inorganic coating reaches 8 Mohs hardness and is rated for continuous operation at 400 °C, well above common printing temperatures. The glass substrate itself defines the practical ceiling; exceeding the printer’s own bed-heater capability or using adhesives not rated for this temperature can damage the surface. No magnetic base or flexible steel sheet is included, so the plate must be clamped or bonded to the existing heater.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The inorganic coating has a hardness of 8 Mohs and is rated to withstand 400 ºC, so it should endure many heating cycles without degrading.
Flatness is held below .2 mm across the surface, and the coating expands with heat to increase grip, so thermal stress on the glass is the practical limit.
The plate itself adds no noise or power draw; it simply stores heat evenly, and the microporous coating releases prints once the bed cools.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?