BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adjustable 10–30 L/min airflow clears smoke and dust, keeps edges clean and runs at 60 dB
This air assist kit connects to compatible laser engravers to blow away smoke and dust while cutting. Adjustable airflow ranges from 10 to 30 L/min and operates at a rated 60 dB. The pump runs on AC 110 V or 220 V at 50 Hz and draws 16 W maximum power. It is intended for users who want cleaner edges and less residue on their engraving projects.
Verify that your mains supply matches the 110 V or 220 V 50 Hz rating and that you have a suitable outlet for the pump. The kit includes a 2 m tube with a 1/8 inch air outlet, so confirm your engraver has a compatible nozzle or adapter. Ensure you can route the tube without sharp bends that could restrict the 0.03 MPa maximum pressure.
The kit suits hobbyists and light-duty makers who cut or engrave materials around 3 to 6 mm thick and want quieter operation. It is not designed for high-volume production or thick industrial substrates that demand higher pressure or flow. Buyers needing integrated enclosure filtration or multi-head distribution should look at dedicated fume-extraction systems.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The kit includes the air pump and a 2 m tube for direct connection to the engraver; no additional accessories need to be purchased.
The pump delivers adjustable airflow from 10 to 30 L/min; use the lower end for light engraving and the higher end for thicker cuts up to 6 mm.
At 60 dB the pump runs at roughly the volume of a household electric fan, keeping the engraving area quiet enough for comfortable operation.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?