Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a standard 2.5 inch SATA 22-pin drive to 12+6-pin or 17+7-pin Mac SSDs from 2010 to 2013 using a selector switch
This gender changer connects a standard 2.5 inch SATA 22-pin host connector to legacy Apple SSD modules using 12+6-pin and 17+7-pin interfaces. It supports drives from 2010 to early 2013 MacBook Air, Pro and Retina models including part numbers A1425, A1398, MC975 and MC976. A physical switch selects which pinout is active, so only one SSD operates at a time. The adapter works across operating systems once the drive is formatted for the target platform.
Technicians and owners moving data from supported Mac SSDs to a SATA host will find this tool useful for reading or reformatting the drives. It cannot power both 12+6-pin and 17+7-pin modules simultaneously, so users needing concurrent access to two drives must use separate adapters. Builders working with non-Apple SATA SSDs or newer Mac storage formats will not find the required connectors on this device.
The hardware switch that toggles between the 12+6-pin and 17+7-pin SSD connectors is the decisive specification. Only one legacy Mac SSD can be attached and powered at any moment. If your workflow demands simultaneous dual-drive operation, this adapter does not meet that requirement.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
Align each connector with its keyed slot on the adapter, then press straight down until fully seated; the switch selects which pinout is active, so set it before powering the host.
The switch is a simple mechanical slider rated for typical user cycles; avoid forcing it and keep the adapter free of dust to maintain reliable contact.
The SATA host connection caps sustained throughput at the interface's native ceiling, so extended transfers will plateau there regardless of the Mac SSD's own rating.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?