Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a 2.5" SATA drive via USB 3.0 or 3.1 Type-C with tool-free fitting and UASP support
This enclosure connects a 2.5″ SATA I, II or III hard drive or SSD to a computer, laptop, router, PlayStation or Xbox through a USB 3.0 Micro-B or USB 3.1 Type-C cable. It suits drives of 7 mm or 9.5 mm height and needs no extra power supply. The tool-free design lets you swap drives quickly for data recovery or portable storage expansion.
The lightweight ABS housing slides open without tools so you can insert or remove a drive in seconds. A USB 3.0 Micro-B plug and a USB 3.1 Type-C plug are both provided, letting the same enclosure work with older Type-A ports and newer Type-C ports without an adapter. Hot-swap support means the host recognises the drive immediately after connection.
The SATA interface supports the UASP protocol, which can raise throughput up to 70% over standard USB 3.0 when the host also supports UASP. Maximum transfer rate is 5 Gbps, and the enclosure falls back to USB 2.0 or 1.1 on legacy ports. This speed ceiling is the deciding factor if you move large media files or system images regularly.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
The enclosure reaches a maximum of 5Gbps over USB 3.0/3.1 Type-C and supports UASP accelerated transmission, which is 70% faster than conventional USB 3.0 when the host also supports UASP. It is backward compatible with USB 2.0 and 1.1 ports.
The tool-free tray accepts 2.5 inch SATA I, II and III hard drives or SSDs that are 7mm or 9.5mm thick.
Slide off the cover, insert the SATA drive until it seats firmly, replace the cover, then connect the USB cable to the host. The step often missed is pushing the drive all the way in so the SATA connector engages completely before closing the cover.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?