LORDWORLD JCA140 USB-C to DisplayPort Adapter 4K 60Hz 14.5 cm
Connects a USB-C device to a DisplayPort display at 4K 60Hz with a 14.5 cm aluminum cable
- Connect a 4K display at 60 Hz via DisplayPort 1.2
- Plug-and-play operation with no driver installation needed
- USB-C Alternate Mode carries video directly from the port
- Compact 14.5 cm cable keeps the setup tidy
- Aluminium housing protects the connector and aids heat dissipation
Connect 4K displays via USB-C
The JCA140 adapter links a USB-C laptop or tablet to a DisplayPort monitor, projector or HDTV at 4K 60Hz. It complies with DisplayPort 1.2 and uses Alternate Mode so no driver installation is needed. The 14.5 cm cable suits desk setups where a short reach keeps the workspace tidy. Plug it in and the external screen is ready immediately.
Passive aluminium build runs silent
The adapter draws power from the host port and has no active electronics that generate heat or noise. Its aluminium housing acts as a passive heat spreader, so the unit stays cool during typical office or streaming use. There is no fan, no coil whine and no measurable temperature rise under normal loads. Power consumption stays within the host port’s standard current limit.
Short fixed cable limits placement options
The integrated 5.5 in cable cannot be replaced or extended without adding a separate coupler, so the source device must sit close to the display input. Users needing longer runs or routing through cable trays will need a different solution. The aluminium shell resists wear from frequent connect and disconnect cycles. No bundled software or accessories alter this physical constraint.
How it compares
Measured against everything we stock in USB Graphics & Display Adapters, at today’s prices. Recalculated every night.
- Price $33.99
- Pricier than about 67% of the 748 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | LORDWORLD |
Questions about this item
How do I install the JCA140 adapter and which step do people often miss?
Plug the USB-C male end into a host port that supports DisplayPort Alternate Mode, then connect a DisplayPort cable to the female port; the step often missed is confirming the host port carries video, as data-only USB-C ports will not work.
What maintenance or replacement will the JCA140 need over time?
The adapter has no moving parts or firmware; only the 14.5 cm cable and aluminum housing may need replacement if the connectors wear or the cable is damaged from repeated bending.
What limit appears first during sustained 4K 60Hz use?
The 14.5 cm cable length limits placement flexibility, and the DisplayPort 1.2 bandwidth ceiling caps resolution at 4K 60Hz without support for higher refresh rates or HDR metadata.
More in USB Graphics & Display Adapters
Similar items
Cables To Go 29531 USB Display Adapter USB-C HDMI
- Black
STARTECH CDP2MDPMM1MB 3.3ft USB-C to Mini DisplayPort Cable 4K 60Hz
- 3 ft (0.91 m)
- USB-C to Mini Displ…
Cables To Go 29471 USB 3.1 Type C to VGA Display Adapter
- Black
STARTECH CDP2HDMM1MB USB-C to HDMI Cable 1m 4K 30Hz
- 3 ft (0.91 m)
- USB to HDMI Adapters





