Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A .5 m SFF-8643 breakout cable splits one Mini SAS HD port into four SFF-8482 connectors with integrated SATA 15-pin power for up to four drives at 6 Gb/s each
This cable connects a Mini SAS HD SFF-8643 host port to four SFF-8482 drive connectors. It is intended for builders who need to attach SATA or SAS hard drives directly to a controller or motherboard. Each breakout end combines a 7-pin data connector with a 15-pin SATA power connector. The assembly is sold new and measures .5 metres.
The SFF-8643 male end plugs into a SAS HBA or PCIe controller; it must not be connected to a backplane. Four SATA power cables from the power supply are required to energise the drive adapters. The thin, tape-braided construction helps routing inside tight chassis. Drives connect via the SFF-8482 interfaces which carry both SAS and SATA signalling.
Every breakout leg is labelled to simplify cable management during installation. The integrated SATA power connectors remove the need for separate drive power splitters. Data transfer operates at up to 6Gbs per attached drive. No software or drivers accompany the cable.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
The cable is rated for up to 6 Gb/s per drive across its four SFF-8482 breakout connectors, so sustained throughput depends on the host controller and drives rather than the cable itself.
The cable is passive and carries only signalling and SATA power through to each drive; it generates no measurable heat and adds no power draw beyond what the attached drives require.
You need a Mini SAS HD SFF-8643 male port on your SAS HBA, PCIe controller or motherboard to plug the cable's host connector into.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?