Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A MiniSAS SFF-8087 fan-out cable connects one controller port to four SATA drives at 6 Gbps over 3.3 ft
This new LORDWORLD cable connects a SAS controller to four SATA hard drives or SSDs using a single SFF-8087 connector. The fan-out design reduces clutter inside servers, workstations and storage enclosures while supporting data rates up to 6 Gbps per lane. At 3.3 ft long, it suits typical internal routing in rack or tower chassis.
The breakout suits administrators expanding direct-attached storage on RAID controllers or HBA cards that present an SFF-8087 port. It is backward compatible with earlier SAS and SATA generations for flexible integration. Builders needing to attach drives with SAS-native connectors or interfaces other than SATA should look at a different cable assembly.
The single Mini SAS SFF-8087 plug splits into four standard SATA data connectors, making this the decisive specification for matching your controller port to the installed drives. Each lane delivers up to 6 Gbps throughput for high-speed transfers in RAID or JBOD configurations. Verify that your controller exposes an SFF-8087 internal port before ordering.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
The SFF-8087 connector attaches directly to a standard internal MiniSAS port on your SAS RAID controller or HBA.
Yes, the cable is backward compatible with earlier SATA generations so 3 Gbps drives will operate at their rated speed.
Check the controller BIOS or OS disk utility; each drive should report a negotiated link speed of 6 Gbps per lane.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?