Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects NVME M-key SSD via Oculink SFF-8611/8612 or NGFF B-key SSD via SATA, supporting 2230, 2242, 2260 and 2280 form factors
This adapter connects M.2 storage to a system using either an Oculink SFF-8612 or SFF-8611 interface or a standard SATA 22-pin header. It accepts M.2 modules in 2230, 2242, 2260 and 2280 lengths and replaces a 2.5 inch drive bay. The card is designed for builders adding NVME or SATA SSDs without a native M.2 slot. It does not support SAS or Slimline SAS drives.
The board fits into an internal Oculink or SATA header and holds the M.2 drive with a screw. NVME M-key SSDs only operate through the Oculink path, while NGFF B-key or B+M SATA SSDs only operate through the SATA path. Cross-connecting them — NVME to SATA or SATA to Oculink — will not work. The adapter also cannot convert between the two protocols.
Verify that your motherboard or backplane provides an SFF-8611 or SFF-8612 Oculink port for NVME drives or a free SATA 22-pin header for SATA drives. Confirm the M.2 SSD keying matches the intended path: M-key for NVME over Oculink, B-key or B+M for SATA over the SATA header. The card does not support NVME drives on SATA ports or SATA drives on Oculink ports.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
After fitting the SSD into the M.2 slot and connecting the SFF-8612 cable to the mainboard, power on and open BIOS or OS disk management; the drive should appear as a PCIe 3.0 x4 NVMe device.
The adapter board with SFF-8611/8612 Oculink and SATA 22-pin connectors is included; you must supply an M.2 NVMe M-key or SATA B/B+M key SSD (2230, 2242, 2260 or 2280) and the matching Oculink or SATA cable.
It accepts 2230, 2242, 2260 and 2280 modules; NVMe M-key SSDs run over the Oculink interface, while SATA B-key or B+M-key SSDs run over the SATA 22-pin interface — cross-mode operation is not possible.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?