Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.1 Type-E header to one USB 2.0 Type-A port and dual 9/10-pin headers with a built-in hub chipset running at 480Mbps
This adapter converts a motherboard USB 3.1 Type-E header into a USB 2.0 Type-A port and two 9/10-pin headers. It is designed for builders who need to connect legacy front-panel cables or internal USB devices to a modern 20-pin header. A USB 2.0 hub chipset manages the connection and provides 480 Mbps bandwidth. Each port supports DC 5V 500mA current delivery.
The adapter replaces the need for a motherboard with native Type-A or 9-pin headers when only a Type-E connector is available. The jump is worth it when a case front panel uses older USB 2.0 cables or 9-pin connectors that cannot plug directly into the 20-pin header. It also solves port shortages by splitting one Type-E header into three usable connections for internal devices.
Installation requires plugging the male Type-E connector into the motherboard header and attaching cables to the female Type-A and dual 9/10-pin ports. The package includes one adapter, one cable and one PCBA for flexible routing. Care is needed to align the 9-pin and 10-pin plugs correctly, as reversed insertion is the most common issue. No drivers are required for the hub chipset.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LORDWORLD |
The adapter plugs directly into a motherboard USB 3.1 front-panel header that uses the 20-pin Type-E keying.
Align the missing-pin key on each 9-pin connector with the blocked hole on the motherboard USB 2.0 header before pressing down.
The hub chip is soldered to the PCBA and is not user-replaceable; if a port stops delivering 5 V 500 mA the whole adapter must be swapped.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?