DELL Precision M3800 XPS 9530 15.6" Touchscreen QHD+ LCD Screen G7M20
- Laptop-computer-rep…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 16 inch WUXGA 1920x1200 laptop replacement panel with 165Hz refresh, 300 cd/m² brightness, 1200:1 contrast, 16.7M 45% NTSC colour and a 40 pin connector
This 16 inch laptop display delivers a WUXGA 1920x1200 resolution at a 165Hz refresh rate. It uses a 40 pin connector and a non-touch surface. The panel is built as a direct replacement for the N160JME-GEK REV.C1 model. Brightness reaches 300 cd/m² with a 1200:1 contrast ratio.
The screen suits owners of a compatible 16 inch chassis who need a 165Hz panel with 45% NTSC colour coverage. Wide 89 degree viewing angles support consistent colour from multiple positions. Buyers who require touch input or a wider colour gamut should look at a different part.
The single specification that decides fit is the exact REV.C1 revision combined with the 40 pin interface. Matching the model number alone is not sufficient; the revision and pin count must align with the original panel. Email requirements after ordering if confirmation is needed.
Measured against everything we stock in Laptop Screens & Display Panels, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Model name | N160JME-GEKREV.C1 |
| Part number | N160JME-GEKREV.C1 |
| Display | |
| Screen size | 16 in (40.6 cm) |
| Display resolution | WUXGA 1920 × 1200 |
| Compatibility | |
| Supported models | N160JME-GEKREV.C1 |
The 40-pin connector carries the WUXGA 1920x1200 signal at 165Hz; it is the only video and power interface on this panel.
The active area fits a standard 16-inch frame; the 40-pin flex exits from the lower edge, so the hinge cut-out must align with that cable route.
Remove the bezel, disconnect the old 40-pin cable, connect the new cable ensuring the latch clicks, then test before refitting the bezel; the latch not seating fully is the common error.
More in Laptop Screens & Display Panels
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?