Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Extracts HDMI video to DVI and splits audio to optical or 3.5 mm stereo with 5.1 or 2.0 channel switching up to 1080p 60 Hz
This adapter converts an HDMI source signal into a DVI video output while extracting audio to both optical Toslink and 3.5 mm stereo jacks. It supports 5.1-channel DTS or AC3 and 2.0-channel LPCM or PCM formats. A selector switch chooses between 5.1 and 2.0 channel modes. The unit is powered by an included 5 V 1 A adapter.
Verify that your source device has an HDMI output and your display accepts a DVI-D input. Ensure you have an optical or 3.5 mm audio input on your sound system for the extracted signal. The converter handles video resolutions up to 1080p at 60 Hz and lower standards such as 720p and 480p. No driver installation is required for operation.
The compact enclosure measures 80 by 84 by 28 mm and weighs 200 grams. One HDMI input connects to the source while one DVI-D, one coaxial, and one 3.5 mm jack provide simultaneous video and audio outputs. A 5.1/2.0 channel switch sits on the chassis for quick format selection. Plug-and-play design means immediate use with consoles, media players, or laptops.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | HDMI to DVI |
The package includes the HDMI-to-DVI audio extractor and a 5 V 1 A power adapter. You will need to supply your own HDMI cable, DVI cable, Toslink optical cable or 3.5 mm stereo cable depending on which outputs you plan to use.
Use the 5.1 CH position when your source sends DTS or AC3 surround sound and you are connected to an optical receiver that can decode it. Switch to 2.0 CH when you only need stereo PCM through the optical or 3.5 mm jack, such as for headphones or a soundbar that accepts two-channel audio.
The adapter passes video at up to 1080p resolution at 60 Hz and is also compatible with 480i, 576i, 720p at 50 or 60 Hz, 1080i at 50 or 60 Hz and 1080p at 50 Hz, so most HD sources will display at their native refresh rate.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?