Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2×2 HDMI matrix routes two 4K sources to two displays while extracting audio via optical and 3.5 mm outputs, controlled by an IR remote
The LUOM OZJ6 is a 2x2 HDMI matrix switch that routes two 4K HDR sources to two displays independently. It supports HDMI 2.0b and HDCP 2.2 for protected content playback. Audio can be extracted from either input through dual SPDIF optical and dual 3.5 mm stereo outputs. An IR remote is included for source selection and switching control.
The unit draws power from a supplied USB charger rather than from the HDMI lines themselves. No internal fans or active cooling are present, so operation is completely silent. Typical power consumption is low enough for the included adapter, and the aluminium enclosure dissipates the small heat load without temperature concerns.
At 5.91 x 2.36 x 0.79 inches and 11.9 ounces, the matrix sits on a shelf or mounts with adhesive pads in a rack. It accepts HDMI cables up to 10 metres at AWG26 for 4K@60Hz signals. Two SPDIF and two 3.5 mm outputs free the displays from handling audio, sending multichannel LPCM, Dolby or DTS 5.1 to a separate amplifier or soundbar.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Product line | OZJ6 |
| Model name | OZJ6 |
| Part number | OZJ6 |
| Product type | HDMI Switchers |
| Adapter type | HDMI Switch/Extender |
| Product color | Black |
| Performance | |
| Bandwidth rating | 18.5 Gbit/s/600 MHz |
| Display | |
| Maximum supported resolutions | 4K@60 Hz |
| Audio & video | |
| Matrix switching | Yes |
| Sound | Yes |
| Ports & slots | |
| Port count | 2 |
| Input ports | 2 x HDMI |
| Output ports | 2 x HDMI |
| Size & build | |
| Max cable length | 10m AWG26 HDMI2.0b standard cable |
| Product dimensions | 5.91 × 2.36 × 0.79 in |
| Product weight | 11.9 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1x HDMI Matrix 2 in 2 out 1x 5 V power adapter 1x IR Remote Control 1x User Manual |
Connect up to two sources to the two HDMI inputs and two displays to the two HDMI outputs using cables no longer than 10 metres, plug in the supplied charger via the USB cable, then use the IR remote to select which source goes to which output; the step often missed is powering the unit before switching.
No scheduled maintenance is required; if the IR remote stops working replace its battery, and if a display loses signal check that the HDMI cables are still firmly seated and within the 10-metre limit.
The 18.5 Gbps bandwidth ceiling is reached first; it caps the signal at 4K 60 Hz RGB 8:8:8 and prevents higher refresh rates or deeper colour depths from passing through.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?