Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Bi-directional DisplayPort 1.4 switch connects two sources to one display or one source to two displays at up to 8K 30 Hz and 4K 144 Hz
The LUOM TJ-A106 routes a single DisplayPort 1.4 source to one of two displays or switches between two sources on one display. It supports 8K at 30 Hz, 4K at 144 Hz and 1080p at 240 Hz with 32.4 Gbps bandwidth. Only one output is active at a time. The unit is new and ships with a 5 V USB power cable.
The aluminium enclosure dissipates heat without a fan, so operation is completely silent. A 5 V USB supply is mandatory; without it the switch will not pass a signal. Power draw is minimal and adds no measurable load to a typical USB port or wall adapter.
At 12 by 6 by 0.08 inches and 1.2 ounces the switch fits behind a monitor stand or under a laptop dock. It requires a free USB-A port for the included power cable and standard DisplayPort 1.4 cables for each connection. It does not support simultaneous dual-display output or MST hub functionality.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Product line | TJ-A106 |
| Model name | TJ-A106 |
| Part number | TJ-A106 |
| Product type | DisplayPort Switchers |
| Adapter type | DisplayPort Switch/Extender |
| Product color | Black |
| Performance | |
| Bandwidth rating | High Speed 32.4 Gbit/s |
| Display | |
| Maximum supported resolutions | 8K@30 Hz 4K@120 Hz |
| Ports & slots | |
| Port count | 2 |
| Input ports | 2XDisplayPort 1.4 |
| Output ports | 1XDisplayPort 1.4 |
| Connector type | Female |
| Size & build | |
| Product dimensions | 12 × 6 × 0.08 in |
| Product weight | 1.2 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1X Directional DisplayPort 8K 1 to 2 / 2 in 1 Out Switch 1X DC 5 V power line 1X Product manual |
Connect your DisplayPort 1.4 cables to the two input ports and the single output port, then plug the included DC 5V power line into the USB power connector — the switch will not pass any signal without external power.
The unit has no user-serviceable parts; if the mechanical select button or the indicator LEDs fail after extended use, the entire switch must be replaced.
The 32.4 Gbps bandwidth ceiling caps you at 4K 144 Hz or 8K 30 Hz; pushing higher resolutions or refresh rates will cause signal drop-outs or fallback to lower modes.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?