Xerox 108R00725 solid ink cartridges (genuine brands) yellow 3 pack 3400 pages
- 3 Pack
- Yellow
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1 kg spool of 1.75 mm True Orange ABS filament for MakerBot Replicator 1, Replicator 2X and Thing-O-Matic Stepstruder MK6+ printers
This 1 kg spool of True Orange ABS plastic is made for MakerBot Replicator 1, Replicator 2X and Thing-O-Matic Stepstruder MK6+ machines. The 1.75 mm diameter filament feeds directly into the supported extruders without modification. It arrives new on an 8 in spool with a 2 in hub hole.
Owners of the named Replicator and Thing-O-Matic printers can load this spool and print immediately. Users of other printer brands or different filament diameters cannot use this material. The amorphous melting behaviour and 230 °C nozzle temperature are tuned for these specific systems.
The single specification that decides fit is the 1.75 mm filament width required by the compatible MakerBot extruders. The spool provides 1 kg of ABS plastic with a glass temperature of 105 °C and a nozzle temperature of 230 °C. Verify your printer accepts 1.75 mm filament before purchasing.
Measured against everything we stock in OEM Ink Cartridges, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Makerbot |
| Model name | MP01978 |
| Product color | True Orange |
| Size & build | |
| Main material | ABS plastic |
| Diameter | 1.75 mm |
| Product weight | 2.2 lb (1 kg) |
| Shipping weight | 1.35 kg |
| Package size | 272 × 251 × 89 mm |
| Compatibility | |
| Compatible systems | MakerBot 3D Printers: Replicator 1 Replicator 2X Thing-O-Matic Stepstruder MK6+ and Up |
| More details | |
| Melting point | 1Amorphous, no "true" melting point |
Mount the 8 in diameter spool on the holder so the 2 in hub hole seats fully, then feed the 1.75 mm strand straight into the extruder inlet; the step users miss is pre-heating the nozzle to 230 °C before the first pull so the amorphous ABS softens instead of cracking.
A 1 kg spool lasts until the 2.20 lb supply is exhausted; replacement timing depends entirely on part volume and infill percentage, so weigh the spool periodically and swap when the remaining filament no longer covers the next job.
The glass transition at 105 °C (221 °F) is reached before any true melting point, so sustained bed or chamber heat above that level will cause the amorphous ABS to soften and lose dimensional accuracy first.
More in OEM Ink Cartridges
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?