Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Slim 120 mm case fan with 15 mm height, 300-2100 RPM speed range, 41.1 CFM airflow, 1.45 mm/H2O static pressure, and 4-pin PWM control for radiators and tight spaces
The Manw P12 Slim PWM PST is a 120 mm case fan with a 15 mm installation height. It targets builders working in small form factor chassis where a standard 25 mm fan will not fit. The 4-pin PWM connector enables automatic speed control between 300 and 2100 RPM. It suits pressure-restricted cooling such as radiators and dense heatsinks.
This fan replaces 25 mm thick models when clearance is the limiting factor. The jump is worth it if your current fan cannot mount because of height constraints or if you need stronger static pressure for restrictive radiators. It delivers 1.45 mm H2O static pressure and 71.53 m³/h airflow at full speed. Buyers who need maximum airflow in unrestricted open-air paths may prefer a thicker high-airflow design instead.
Verify that your case or radiator mounting points accept a 15 mm thick 120 mm fan. Confirm the motherboard or fan controller provides a 4-pin PWM header for speed regulation. The fan uses PWM Sharing Technology so multiple units can share one header. Ensure the 300–2100 RPM range matches your desired noise and cooling curve.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Manw |
The fan is 15 mm thick, so it fits small form factor cases where a standard 25 mm fan would not fit.
Daisy-chain each fan to the next via the 4-pin connector; the motherboard header controls speed for all linked fans from 300 to 2100 RPM.
The motor uses a sealed bearing design that requires no lubrication; if noise or vibration increases after extended use, replace the entire fan.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?