Tripp Lite U022-015 USB 2.0 A to B cable 15 ft
- USB A to USB B
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts a motherboard USB 3.1 Type-E 20-pin header into two USB 2.0 Type-A ports plus a 9/10-pin header at 480 Mbps with 500 mA per port
This adapter converts a motherboard front-panel USB 3.1 Type-E 20-pin male header into two USB 2.0 Type-A female ports and a 9/10-pin USB 2.0 header. A built-in hub controller provides stable 480 Mbps data speed on each port. Each output delivers 500 mA at 5 V for peripherals such as RGB controllers, Wi-Fi adapters or internal card readers. It suits DIY builders and embedded-system refits needing extra internal USB connections.
Verify that your motherboard provides a USB 3.1 Type-E (Key-A 20-pin) front-panel header before ordering. The adapter also requires a free 9-pin or 10-pin USB 2.0 internal header on the board for the third output. Confirm the pin-out matches the standard 9/10-pin layout used by your chassis front I/O module. No additional drivers are needed for operation.
A compact PCB with adhesive backing secures the unit inside the case for tidy hidden wiring. The dual 9/10-pin compatibility solves header mismatches between newer Type-E front panels and legacy motherboard USB headers. Plug-and-play operation works across ATX, mATX and ITX form factors. The splitter expands limited internal USB resources for front-panel modules, fan hubs and lighting controllers.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Manw |
Only the adapter board is supplied; it has an adhesive backing for securing it inside the case, so no separate screws or cables are needed.
No, this single adapter fits both the 9-pin and 10-pin internal USB 2.0 headers, so it works with either layout.
The built-in hub controller delivers the standard USB 2.0 rate of 480 Mbps, so sustained reads and writes will sit at that ceiling.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?