Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 60W AC adapter delivering 48V at 1.25A with a 5.5×2.0 mm barrel plug, operating on 100-240V input and including a power cord
The Mean Well GS60A48 delivers a regulated 48 V output at up to 1.25 A for equipment that requires a 60 W external supply. It accepts a universal 100-240 V AC input at 50/60 Hz, so it works on mains worldwide without a voltage switch. The barrel connector measures 5.5 mm outer by 2.0 mm inner diameter, matching many industrial and networking devices. A detachable AC power cord is included in the box.
This unit is a direct swap when the original adapter for a 48 V device stops working or goes missing. The upgrade is worthwhile if the previous supply ran hot, lacked safety certifications, or used a proprietary plug that limited replacement options. It is not suitable for hardware that demands more than 60 W or a different output voltage.
Installation is as simple as connecting the barrel jack to the device and plugging the IEC cord into a wall socket. No drivers, configuration or soldering are required. The most common issue is a polarity or connector-size mismatch, so verify that the equipment expects a centre-positive 5.5x2.0 mm plug before powering on.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Model name | GS60A48 |
The adapter terminates in a 5.5 mm outer diameter by 2.0 mm inner diameter barrel connector carrying 48 V at 1.25 A.
Plug the supplied IEC C7 figure-8 mains lead into the adapter's built-in C8 inlet then into a 100-240 V 50/60 Hz wall socket.
Replace the unit if the output voltage drops below 48 V under load, the housing becomes hot to the touch, or the barrel plug shows worn or intermittent contact.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?