Apple MD565LL/A 60W MagSafe 2 Power Adapter
- AC Power
- 60 W, Input: 100-24…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
MEIRIYFA, shenzhen milidianzi
A 5V 3-pin ARGB splitter hub expands one header to ten ports with SATA power and a 50 cm cable
The MEIRIYFA 409 hub expands a single 5V addressable ARGB header into ten ports for connecting multiple fans or LED strips. It draws power directly from a SATA connector on the power supply to prevent voltage drop across all connected devices. The unit fixes inside the chassis using an adhesive backing for a secure, space-saving installation.
A dedicated SATA power input feeds the hub independently of the motherboard header, maintaining consistent voltage when all ten ports are populated. This architecture avoids the current limitations of a single 5V header, so lighting effects remain stable during extended operation. The design ensures each connected device receives adequate power without overloading the mainboard circuit.
The hub accepts only 5V 3-pin addressable ARGB connectors and must not be attached to 12V RGB headers. The included cable runs approximately 50 centimetres from the motherboard to the hub, defining the maximum placement distance inside the case. Builders needing 12V analogue RGB control or longer cable runs cannot use this unit.
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | MEIRIYFA, shenzhen milidianzi |
| Model name | 409 |
| Part number | 409 |
| Adapter type | Classic |
| More details | |
| Team affiliation | 1 Piece |
The hub itself has no moving parts and draws power through the SATA connector, so it produces no audible noise and negligible heat during continuous operation.
A standard SATA power connector from the PSU is needed; the hub does not draw power from the motherboard header.
No, the hub only accepts 5 V addressable ARGB devices; connecting 12 V components can cause damage.
More in Other Adapters & Couplers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?