Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects 40 Gb/s QSFP+ ports to 10 Gb/s SFP+ cables using a QSA adapter
The Mellanox MAM1Q00A-QSA is a QSFP+ to SFP+ adapter module that converts a 40 Gb/s port for use with 10 Gb/s SFP+ cabling. It targets network engineers and data-centre operators who need to connect 10 GbE SFP+ links into 40 GbE QSFP+ switch or adapter ports without replacing existing transceivers.
This module replaces direct 40 GbE QSFP+ interconnects when the remote endpoint only supports 10 GbE SFP+. The jump is worth it when consolidating 10 GbE links onto higher-density 40 GbE ports or when extending the life of installed SFP+ copper or fibre cables in a 40 GbE environment.
Installation is a simple hot-plug of the QSFP+ end into the host port followed by insertion of an SFP+ transceiver or cable into the module receptacle. Compatibility issues usually arise when the host port firmware does not recognise the adapter or when the inserted SFP+ module exceeds the host's supported media types. The adapter conforms to SFF-8431 and SFF-8436 standards.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | MELLANOX TECHNOLOGIES, INC. |
| Size & build | |
| Shipping weight | 0.45 kg |
| Package size | 305 × 241 × 178 mm |
Yes, it conforms to the SFF-8436 QSFP+ connector standard and is built in the QSFP+ form factor.
Insert the QSFP+ end into the 40Gb/s port, then plug the SFP+ module into the adapter receptacle; the step people miss is fully seating both connectors until the latches click.
The adapter itself is passive and requires no replacement; only the SFP+ transceiver or cable inserted into it may need swapping if link requirements change.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?