Micro Connectors 1.5ft Sleeved 8 (6+2) Pin PCI-e GPU Power Extension Cable Blue 2-Pack
Two 45 cm sleeved 8 (6+2) pin PCI-e GPU power extension cables in blue, 18 AWG wire with heat-shrink-free triple-layered sleeving for cleaner routing and improved airflow
- Product colorBlue
- Blue sleeved cables enhance build aesthetics
- 18 AWG wires deliver reliable GPU power
- 45 cm length suits tidy cable routing
- Heatshrink-free triple-layer sleeving improves airflow
- Two cables included for dual-connector graphics cards
Blue sleeved PCIe power extensions
These 1.5 ft blue extensions let builders route 8-pin (6+2) GPU power cleanly around larger cases or custom loops. The pair suits single or dual-card setups where stock cables fall short or clash with a colour theme.
Triple-layer sleeving and 18 AWG conductors
Heatshrink-free, individually sleeved wires keep the bundle flexible for tight bends behind motherboard trays while resisting kinks during installation. The 18 AWG copper handles typical GPU current loads without adding bulk that blocks airflow.
Replaces short or stiff stock PCIe cables
The 45 cm reach solves routing gaps in full-tower or reverse-layout builds where factory leads pull tight across the motherboard. Buyers needing longer runs for vertical GPU mounts or distributed PSU placements should measure first, as these extensions add fixed length only.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 92% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Blue |
Questions about this item
What power interface does the 8 (6+2) pin PCI-e extension cable use?
It uses an 8-pin PCI-e connector that splits into 6+2 pins to extend the graphics card power connection.
What clearance is needed for the 45 cm sleeved cables in a case?
Each cable is 45 cm (17.72 in) long with triple-layered sleeving on 18 AWG wires, so allow space for the thicker sleeved diameter when routing.
How are the two extension cables installed and what step is often missed?
Connect the female end to the existing PSU PCI-e cable and the male end to the graphics card, ensuring the 6+2 pin latch clicks fully into the GPU socket.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 5.5×1.7 mm female to 5.5×2.5 mm male DC power adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB Type C Female to Female Adapter internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





