Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SAS SFF-8484 controller or backplane to four SATA drives at 6.0 Gb/s over 1.64 ft
This Micro Connectors cable connects a SAS controller or backplane with an SFF-8484 port to four SATA hard drives. It serves builders assembling direct-attached storage or RAID arrays that require a single multi-lane link to multiple drives. The 1.64 ft length suits internal routing inside standard chassis.
Installers who need to break out one SFF-8484 connection into four SATA data paths will find this cable fit for purpose. It is not for systems that lack an SFF-8484 host port or for drives requiring a different connector type. Buyers needing longer reach or a different breakout count should look at other cable assemblies.
The cable supports the first-generation SAS 6.0 Gb/s duplex interface and is SATA III compliant, giving each of the four attached drives full 6 Gb/s headroom. Bandwidth scales with the number of active drives, so four simultaneous streams share the aggregate controller throughput. It runs out when the host controller or backplane cannot sustain the combined load across all lanes.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Micro Connectors |
| Product type | Data Transfer Cable |
| Size & build | |
| Overall length | 1.64 ft (0.5 m) |
The SFF-8484 connector attaches directly to a SAS controller or backplane that provides an SFF-8484 port.
The cable supports 6 Gb/s SAS and SATA III; speeds will negotiate down to the controller's maximum capability.
Check the controller BIOS or OS disk utility for a negotiated 6.0 Gb/s link speed on each attached SATA drive.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?