ModMyMods ATX 24 Pin PSU Jumper Switch Red Light CAB285
ATX 24-pin jumper with illuminated on/off switch powers a PSU without a motherboard
- Product colorBlack
- Key featuresDo you need to turn on an ATX power supply without a motherb
- Powers an ATX supply without a motherboard using the 24-pin jumper
- Red LED shows the PSU is live at a glance
- On/off button replaces paperclip jumpers for bench testing
- Female Molex connector plugs directly into the 24-pin PSU socket
- Simple press starts the unit for quick component checks
ATX 24 Pin Power Supply Jumper
This ATX 24 pin jumper lets you start a power supply without a motherboard. It replaces the paperclip method with a proper switch and a red indicator light. The unit plugs into the PSU 24 pin connector and mimics the motherboard power-on signal. It is aimed at builders testing units on the bench or running pumps during loop filling.
Manual On Off Switch Limits
The switch only bridges the green wire to ground, so the PSU starts but no motherboard supervision is present. Voltage regulation, fan curves and protection circuits remain entirely under the power supply's internal logic. There is no data communication, no monitoring header and no software control. The red LED simply shows that the jumper is active.
Bench Testing And Loop Filling Headroom
The jumper comfortably handles ATX supplies up to their rated wattage because it passes no load current itself. It runs out when a build requires motherboard handshake signals such as power-good timing or SMBus telemetry. For permanent installations or multi-rail sequencing a different solution is needed.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 97% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | GENERIC |
| Model name | MOD-0045 |
| Product color | Black |
Questions about this item
Which version of the ATX 24-pin jumper switch should I choose for my power supply?
The CAB285 model is a single 24-pin female Molex design with a red LED indicator, so there is only one version to select.
What does the red light on the switch show when the PSU is running?
The red LED illuminates once the jumper bridges the 24-pin connector, confirming the power supply has been turned on without a motherboard.
How does the 24-pin ATX interface limit the use of this jumper switch?
It only works with standard 24-pin ATX or EPS power supplies; the switch cannot operate with other connector types or voltages.
More in Internal PSU & Riser Cables
Similar items
Qinghai Electronics 20 Piece Cable Comb Set Pink 24-pin x 4 8-pin x 16
- Pink
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Qinghai Electronics 20-Piece Cable Comb Set Gun Metal Gray 24-pin x4 8-pin x16
- Grey
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Qinghai Electronics 20-Piece Cable Comb Set — 24-pin ×4, 8-pin ×16, White
- White





