ModMyMods MOD-0273 10-way RGB PCB splitter hub internal power cable
A 113 mm PCB hub splits one motherboard 4-pin RGB header into ten connections and can be trimmed to the exact number required
- Product colorBlack
- Key featuresConnect up to 10 RGB cables to your motherboard with this RG
- Connect up to 10 RGB devices from one motherboard header
- Trim the 113 mm PCB to match your exact connection count
- Cut-off sections remain functional as separate RGB hubs
- Adhesive backing enables quick mounting anywhere inside the case
- 4-pin male RGB input powers all connected lighting strips and fans
10-Way RGB PCB Splitter Hub
The ModMyMods MOD-0273 is a black internal power cable hub that connects up to 10 standard 4-pin RGB devices to a single motherboard header. It is designed for PC builders running lighting-heavy configurations who have exhausted the available RGB connectors on their board.
Cut-down PCB for flexible cable management
The hub ships at 113 mm with ten 4-pin ports, but the printed circuit board can be physically shortened to match the exact number of connections required in a specific build. Remaining off-cut sections remain functional as smaller hubs, and an adhesive backing secures the unit anywhere inside the chassis without screws.
Adhesive mount and modular off-cuts
No RGB cables are included in the package, so builders must supply their own lighting strips or fans. The included adhesive strip provides a quick mounting method, while the ability to snip the PCB into multiple working hubs lets one product serve several zones inside the same case.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ModMyMods |
| Model name | MOD-0273 |
| Product color | Black |
Questions about this item
How many RGB devices can the 10-way hub support at once?
The board provides ten 4-pin RGB headers so you can connect up to ten compatible strips, fans or other devices from a single motherboard header.
Does the hub add noticeable heat or noise when all ten ports are active?
It is a passive PCB with no active components, so it generates no noise and negligible heat even with every port populated.
What motherboard header is required to power the splitter?
A standard 4-pin male RGB header on the motherboard is needed; the hub draws its power and signal from that single connection.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





